Spin Glas
1000 Series Spin-GlasŪ
High Temperature Fiber Glass Board Insulation 1000 Series Spin-Glas is a 3.0 pounds per cubic foot (48 kg/m3), semi-rigid board produced by a unique felting process that combines Spin-Glas fiber and controlled amounts of organic binder into an insulation with superior handling properties and insulating effectiveness at minimum cost. 1000 Series Spin-Glas is primarily used for insulating furnaces, boilers, heated vessels, ducts, tanks and other heated equipment operating at temperatures up to 850°F (454°C). Download Data Sheet Order a Product Sample 
800 Series Spin-GlasŪ
Fiber Glass Duct and Equipment Insulation 800 Series Spin-Glas is designed for systems which operate below ambient temperatures where vapor barrier protection is required. 800 Series Spin-Glas is ideal for application on commercial and industrial heating, air conditioning, power and process equipment. These products are not designed for use inside air distribution duct work or equipment where the insulation will be directly exposed to an air stream. 800 Series Spin-Glas duct and equipment insulation is manufactured from inorganic glass fibers bonded together with thermosetting resin. Spin-Glas can be readily cut with an ordinary knife and secured utilizing mechanical fasteners and/or adhesives. Download Data Sheet Order a Product Sample 
Precipitator Spin-GlasŪ
High Temperature Fiber Glass Board Insulation Precipitator Spin-Glas is a 2.4 pounds per cubic foot (38.5 kg/m3), semi-rigid, lightweight, felted board composed of fine rotary process fibers bonded with a special organic resin. Density, binder content and thickness are carefully controlled to assure full insulating value and strength. Specifically designed for insulating precipitators, baghouses, scrubbers, ducts and breechings in power generation plants, Precipitator Spin-Glas is also suited for boilers, heaters, ovens and other industrial equipment operating at temperatures up to 850°F (454°C). Download Data Sheet Order a Product Sample 
HTB 26 Spin-GlasŪ
High Temperature Fiber Glass Blanket Insulation Spin-Glas HTB is a lightweight, off-white insulation blanket designed to provide high insulating efficiency for industrial applications. Spin-Glas HTB Insulation was developed specifically for use in various applications operating at temperatures up to 1000°F (538°C) and requiring a low density blanket. This flexible blanket insulation is particularly suitable for heated, irregular surfaces or in the manufacturing of removable pads and covers. Download Data Sheet Order a Product Sample 
Fabrication Board
Semi-Rigid Fiber Glass Insulation Boards Fabrication Boards are manufactured from inorganic glass fibers bonded by a thermosetting resin. Light, strong and resilient, they are easy to fabricate and install. Made in sheet form, they are available in four different densities and rigidities to meet a wide range of product application temperature and thermal performance requirements. Download Data Sheet Order a Product Sample |